CANM8 CANNECT High Beam Output Interface
$229.95
This is not a universal interface. It is ONLY compatible with the vehicles listed.
Vehicle compatibility has not been established by the store’s fitment listings. Confirm the product requirements before ordering.
Description
Description
Adding a lightbar or set of driving lights to a modern car has never been easier
How Does It Work?
Modern vehicles have all the features you need, just sometimes the lighting output at high beam doesn’t cut it. The CANM8 CANNECT HIGHBEAM is an ideal solution for vehicles which require the installation of additional driving lights (via a relay) which are switched on when the vehicle high beam is active.
By installing into the vehicles digital CAN network, the CANNECT Highbeam interface converts the signal to a low ampere 12v output for your driving light circuit.
What Do You Get?
The C8NECTHIGHBEAM includes
- 1x Vehicle Interface
- 1x Bare Wire Harness
- Vehicle Specific Instructions
COMPATIBILTY NOTES
- Some Vehicles Auto Headlight Dimming May Not Be Retained
- Interface is NOT designed to direct drive lightbars or driving lights. You still need to install a wiring harness for your lights (NOT INCLUDED)
Additional information
Additional information
| Weight | 300 g |
|---|
Installation
Installation
Installation Details
The interface features a mini wiring connector, which unplugs to allow easy installation. There are 2 connections to the vehicle CAN Bus wiring (CAN HI & CAN LO) along with a connection to a permanent, fused 12v power supply and an earth connection.
The interface incorporates a multi-function status LED, which indicates correct connection to the CAN system, CAN activity present and confirmation that the CAN identity has been recognised.
LED Status Details
 | Flashing Red: Searching for CAN information. |
 | Solid Red: CAN Data received but vehicle not yet identified. |
 | Solid Green: CAN Data received and vehicle type recognised. |
 | Flashing Green: Vehicle speed detected. |
Wiring Harness Details
| Connect via a 5A fuse to a PERMANENT 12v supply. | ||
| Connect to a good chassis GROUND point. | ||
| CAN HI Connection : Vehicle CAN HI wire. | ||
| CAN LO Connection : Vehicle CAN LO wire. | ||
| High Beam Output : 12v (1A max) when the high beam is active. |
NOTE: You only get 3 attempts to download the correct vehicle application / installation guide.
Notes
Notes
| Manufacturer Part Number | C8NECTHIGHBEAM |
|---|---|
| Module Outputs | 12v Trigger when high beam is enabled |
| Vehicles Notes | – In some vehicles the Auto Dimming Function may not be retained. Before purchasing this item from a retailer confirm the SW# is applicable to the vehicles listed below: – 300 Series Landcruiser – Interface must be SW:89 or above – 2018-2023 150 Series Prado – Use 2018> Toyota LandCruiser Installation Manual. – Late 2021-Up Subaru Outback – Interface must be SW:90 to 96 or 101 and above – 2022-Up Mitsubishi Outlander – Interface must be SW:92 or above – 2022-Up Subaru Crosstrek (G6X) & WRX (VB/VN), require an alternate software file. Please note these vehicles when placing an order. |
| Tech Note | – In some cases the HIGHBEAM output can be activated with the head lights turned off and the stalk moved to the high beam position. In these cases a switch will need to be installed to cut the power to the HIGHBEAM interface or find a power source that is only active when the lights are in the ON position. – We cannot guarantee the interface will replicate the AUTO dimming function if equipped. |
Related products
-
CANHBAU1: CAN-BUS HIGH BEAM INTERFACE TO SUIT AUDI A4
$189.99Read more -
CANHBVX2: CAN-BUS HIGH BEAM INTERFACE TO SUIT VAUXHALL CROSSLAND
$189.99Read more -
CANHBVW1: CAN-BUS HIGH BEAM INTERFACE TO SUIT VOLKSWAGEN GOLF
$189.99Read more -
CANHBVL3: CAN-BUS HIGH BEAM INTERFACE TO SUIT VOLVO V50
$189.99Read more