Hertz MPX 165.3 Mille PRO Series 6.5″ 200W 2-Way Coaxial Speaker – Pair

Mille PRO Series 6.5″ 2-Way Car Speakers
The coax tweeter concentric to the woofer of the MPX 165.3 car audio coaxial speakers allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36 mm diameter woofer generates deep and controlled bass frequencies. Hertz believes that a good speaker should reveal the emotional power of the music you love.

Features:

• Concentric Coaxial Tweeter: Built in the woofer voice coil, achieving one single point of emission, to re-create the virtual soundstage like in live music performances.
• Tweeter Support Working as A Rear Chamber: Sized for low Fs, to ensure a well-damped high pass frequency roll-off, allowing a low cut-off frequency crossover point.
• 36mm Pure Copper Woofer Voice Coil: Wound on a Polyamide former, for outstanding power handling and dynamic compression-free reproduction.
• Pressed-Pulp Cone With Cotton Fibers: Combining stiffness and lightweight for wide frequency response. The cone profile was geometrically refined to perfectly match the tweeter emission ensuring phase consistency in the crossover area.
• “Boundary Free” Rubber Surround: For improved efficiency and wider mid-bass frequency. (Logo Boundary Free)
• Over-Sized Ferrite Magnet: Combined with very low carbon content iron plates, for low distortion at high power levels.
• Basket: Low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting featuring the aluminium Hertz logo.
• Anti-Vibration Rubber Magnet Cover: Damp spurious vibrations

Specifications:

• Component: Coaxial
• Size: 165mm (6.5″)
• Power Handling – Continuous: 100W
• Power Handling – Peak: 200W
• Impedance: 4-Ohm
• Woofer Voice Coil Ø: 36mm (1.42″)
• Tweeter Voice Coil Ø: 20mm (0.8″)
• Frequency Response: 45 ÷ 21,5kHz
• Woofer Magnet Size (D x D x H): 90 x 45 x 17mm (3.54 x 1.77 x 0.67″)
• Tweeter Magnet Size (D x H): 29.5 x 22 x 4mm (1.16 x 0.87 x 0.16″)
• Woofer Magnet: High-Density Flux Ferrite
• Tweeter Magnet: Neodymium
• Cone: Pressed-Pulp Cone with Cotton Fibers
• Dome: Tetolon
• Xmech: ±6mm (0.24″)
• Speaker Weight (Single): 1.27kg (2.8lbs)