S8DSP: DIGITAL INTERFACE PROCESSOR (S8 DSP)
$1,309.99
The ultra-compact S8 DSP (Order Code S8DSP) is the perfect solution for integrating any OEM source into your audio upgrade project for cars, motorcycles, and boats! S8 DSP is a distilled essence of technology at the service of the highest audio quality in a corrosion-free case cast in metal and composite materials.
S8 DSP processes the audio signal with 96 kHz / 24-bit resolution and has obtained the Hi-Res certification from the JAS (Japan Audio Society), an acknowledgment that certifies the extreme level of audio performance achieved.
The powerful 32-bit DSP manages 6 high/low-level analog input channels, one digital coaxial input, and 8 output channels, offering maximum freedom of configuration to the specialist. The SPDIF coaxial input is ideal for digital connection with a Hi-Res player, a solution that allows for maximum listening quality. For each of the eight output channels we have a level control, the 15-pole parametric equalizer, time delays, and crossover filter available. The 7-band parametric equalizer of the input signal allows obtaining a flat response from OEM sources, which often have an exaggerated emphasis on the low frequency.
Vehicle compatibility has not been established by the store’s fitment listings. Confirm the product requirements before ordering.
Out of stock
Description
Description
POWER SUPPLY
Nominal Power Supply Voltage / fuse: 7 – 20 VDC / 1A
Pulse Operating Voltage: 5 – 24 VDC
Idling Current: 0.34 A
OFF Current (ART OFF): Less than 80uA
OFF Current (ART ON): Less than 80uA
Remote IN: 6 – 20 VDC (10 mA)
Remote OUT: 4 – 20 VDC (150 mA)
ART – Automatic Remote Turn on/off from BTL speaker outputs (selectable): 1.5 – 7 VDC
SIGNAL STAGE
Resolution: 24bit
Sampling Rate: 96 KHz
Distortion – THD at 1 kHz, 1 VRMS Output: 0.004 Per Cent
Bandwidth at -3 dB: 10 Hz – 40 kHz
S/N Ratio at A Weighted, 4V Output, 1 V Master Input: 100 dBA
S/N Ratio at A Weighted, 4V Output, 1 V Digital IN Input: 112 dBA
Channel Separation at 1 kHz: 97 dBA
Input Sensitivity Pre-In: 0.8 – 6 VRMS
Input Sensitivity Speaker-In: 2.5 – 21 VRMS
Input Impedance: 38 kohm (Pre IN/AUX) 4.7 ohm (Speaker IN)
Max Output Level: 11Per Cent THD: 4 V
INPUTS STAGE
Analog Inputs Management: Audio Input Routing Matrix Type
Low Level (Pre In): 6 RCA inputs
Hi-Level: 6 Wired inputs
Digital IN: Coaxial S/PDIF, up to 24bit 96KHz, Extra Gain:3dB, 6dB
OUTPUT STAGE
Low Level (Pre Out): 8 RCA outputs
Output Equalizer 15 poles Parametric EQ: +/-12 dB, 20 -20 kHz
Output Signal Limiter: Yes (Selectable)
CONNECTION
From / To Personal Computer: 1 x micro USB
Bluetooth Data Connectivity (no audio streaming): BT 5.0 (BLE)
CROSSOVER
Filter type: Full / Hi-Pass / Low-Pass / Band Pass
Filter mode and slope:
Linkwitz at 12 / 24 dB
Butterworth at 6 / 12 /18 / 24 / 30 dB
Bessel at 6 / 12 /18 / 24 / 30 dB
Crossover Frequencies: 20 – 20 k Hz (120 step)
Phase control: 0 / 180 Degrees
EQUALIZER (20 HZ – 20 kHz)
Inputs: Parametric EQ: +12 dB – -12 dB, 7 poles (for each input channel)
Outputs: Parametric EQ: +12 dB – -12 dB, 15 poles (for each output channel)
GENERAL
Memory Preset: 4 x Preset
Memory Preset Selection: Through the Control Software or by wire
Input Selection: Through the Control Software or by wire
TIME ALIGNMENT
Distance: 0 – 471.5 cm / 0 – 185.5 in.
Delay: 0 – 13.58 ms
Step: 0.02 ms, 0.7 cm / 0.27 in.
GENERAL REQUIREMENTS
PC connections: 1 x USB 1.1 / 2.0 / 3.0 Compatible or Bluetooth 5.0 BLE
Software / PC Requirements:
Microsoft Windows (32/64 bit): Windows 10 (USB and BT BLE), Windows 11 (USB and BT BLE)
Mac Os: 10.13 Hight Sierra or later (USB and BT BLE)
Minimum Mobile Device Requirements: Android OS 7 or later (USB OTG and BT BLE), iOS 12 or later (BT BLE)
Video Resolution With Screen Resize: min. 1024 x 600
Ambient operating temperature range 0C to 55C
Additional information
Additional information
| Weight | 300 g |
|---|
Reviews (0)
S8DSP: DIGITAL INTERFACE PROCESSOR (S8 DSP)





Reviews
There are no reviews yet